自転車の空気入れチュートリアル

Create a 24-second horizontal phone tutorial of one adult cyclist inflating a bicycle tire. He has close-cropped hair, a navy overshirt, beige trousers, and a small grease mark on his right thumb. A friend films in a courtyard. Keep one matte gray bicycle on its kickstand, rear wheel nearest the camera. The rear tire has a Schrader valve. A black floor pump with a compatible lever-lock head stands beside it. Daylight stays consistent. 0-5s: handheld medium view from his left side. He presses the soft rear tire with his thumb, crouches, and says, "A little air before we go." The friend lowers the camera with him. 5-10s: hard cut close over his shoulder. He unscrews the small valve cap, puts it in a shallow tray, seats the pump head straight onto the valve, and locks its lever. Fingers never pass through spokes. 10-16s: hard cut wider, showing both feet on the pump base. He works the handle through three controlled strokes. The hose flexes naturally, the bicycle stays still, and the tire becomes subtly firmer without swelling dramatically. The gauge needle moves without requiring readable numbers. 16-24s: hard cut close again. He unlocks and removes the head, replaces the same cap, then presses the tire and nods. End before anyone rides away. Use modest handheld movement and brief focus correction, without advertising polish. Hear pump airflow, lever clicks, shoe scuffs, birds, and the single line. Preserve valve location and hose attachment across cuts. No music, subtitles, brand labels, magically repaired damage, or changing bicycle parts. User request: An adult cyclist in a navy overshirt uses a black floor pump to inflate the rear Schrader-valve tire of a matte gray city bicycle in a courtyard.